Smittybilt Smittybilt Gen 2 XRC Front Bumper – 07-18 Jeep, Wrangler, JL, 2/4 Door 77807
The Smittybilt XRC Gen 2 Front Bumper for 2018+ Jeep Wrangler JL/JLU is built for the most demanding off-road conditions. Featuring raised corners for better entry and exit angles, fender-to-fender protection, and a winch-ready design (up to 12K lbs), this
The Smittybilt XRC Gen 2 Front Bumper for 2018+ Jeep Wrangler JL/JLU is built for the most demanding off-road conditions. Featuring raised corners for better entry and exit angles, fender-to-fender protection, and a winch-ready design (up to 12K lbs), this rugged bumper also includes solid D-ring and jack point mounts, integrated recovery points, and PP+TPO slip strips for enhanced rock crawling protection. Its updated design allows for OE fog lights and includes an integrated 1.75″ over-rider bar with lighting mounts, making it the perfect blend of strength and functionality.
This Part Fits:
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 2020 | Jeep | Gladiator | ||
| 2021 | Jeep | Gladiator | ||
| 2022 | Jeep | Gladiator | ||
| 2023 | Jeep | Gladiator | ||
| 2024 | Jeep | Gladiator | ||
| 2025 | Jeep | Gladiator | ||
| 2018 | Jeep | Wrangler | ||
| 2019 | Jeep | Wrangler | ||
| 2020 | Jeep | Wrangler | ||
| 2021 | Jeep | Wrangler | ||
| 2022 | Jeep | Wrangler | ||
| 2023 | Jeep | Wrangler | ||
| 2024 | Jeep | Wrangler | ||
| 2025 | Jeep | Wrangler |
Specifications:
| California Proposition 65 | WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product. |
| 17 | Black |
| D-Ring Mount Included | Yes |
| Drilling Reuired | No |
| Finish | Textured |
| Fitment | Direct Fitment |
| Includes Receiver Hitch | No |
| Install Difficulty | Intermediate Requires some Automotive knowledge |
| Installation Time | 2 Hours |
| 10 | Steel |
| 30 | Yes |
| Parking Sensors Compatible | No |
| Position | Rear |
| Prop65 Chem1 | Di(2-ethylhexyl)phthalate (DEHP) |
| Retains Factory Camera | Yes |
| Retains Factory Fod Lights | Yes |
| 10051 | No |
| Thickness | 3/16 |
| Winch Compatible | Yes |
| Description_INV | Gen 2 XRC Front Bumper 07-18 Jeep, Wra |
| Description_INV | Smittybilt Gen 2 XRC Front 77807 |
| Description_EXT | Smittybilt Gen 2 XRC Front 77807 |
| Description_EXT | XRC Gen 2 Front Bumper – Textured Black (18+ JL/JLU) |
| Description_EXT | Smittybilt Gen 2 XRC Front Bumper – 07-18 Jeep, Wrangler, JL, 2/4 Door |
| Description_MKT | The Smittybilt XRC Gen 2 Front Bumper for 2018+ Jeep Wrangler JL/JLU is built for the most demanding off-road conditions. Featuring raised corners for better entry and exit angles, fender-to-fender protection, and a winch-ready design (up to 12K lbs), this rugged bumper also includes solid D-ring and jack point mounts, integrated recovery points, and PP+TPO slip strips for enhanced rock crawling protection. Its updated design allows for OE fog lights and includes an integrated 1.75″ over-rider bar with lighting mounts, making it the perfect blend of strength and functionality. |
| Description_FAB | Limited Lifetime Structural Warranty / 5 Year Finish Warranty |
| Description_FAB | 2 and 4-door models |
| Description_FAB | UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling |
| Description_FAB | Manufactured from 3/16″ cold rolled steel |
| Description_FAB | O.E. fog light provision |
| Description_FAB | Fits 2018+ Jeep Wrangler JL/JLU |
| Description_FAB | Winch ready – up to 12K lbs |
| Description_FAB | Solid d-ring and jack point mount |
| Description_FAB | Two-stage light texture black finish |
| Description_FAB | 1.75″ .120 wall overrider with kickers |
| Description_FAB | Aggressive design with raised corners for better entry and exit angles |
| Description_DEF | Bumper |
Reviews
There are no reviews yet.