Smittybilt XRC RR BUMP W HITCH TIRE JK 2/4DOOR 76856
The XRC Bumpers Have High Degree Approach Angles And Raised Corners To Maximize Ground Clearance. Manufactured From 3/16 Cold Rolled Steel And Then Robotically Welded To The Exact Specifications. Solid Mount D-Rings That Are Welded On The Inside And Outsid
The XRC Bumpers Have High Degree Approach Angles And Raised Corners To Maximize Ground Clearance. Manufactured From 3/16 Cold Rolled Steel And Then Robotically Welded To The Exact Specifications. Solid Mount D-Rings That Are Welded On The Inside And Outside. Welds Are Ground Down And Smoothed Out, Then A Two Stage Textured Matte Black Powder Coat Is Applied For The Ultimate Look. Features A 2 Receiver Hitch And Two D-Ring Mounts. Each Bumper Is Developed To Be A Complete Bolt On And Requires No Modifications To The Vehicle.
This Part Fits:
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 2007 | Jeep | Wrangler | ||
| 2008 | Jeep | Wrangler | ||
| 2009 | Jeep | Wrangler | ||
| 2010 | Jeep | Wrangler | ||
| 2011 | Jeep | Wrangler | ||
| 2012 | Jeep | Wrangler | ||
| 2013 | Jeep | Wrangler | ||
| 2014 | Jeep | Wrangler | ||
| 2015 | Jeep | Wrangler | ||
| 2016 | Jeep | Wrangler | ||
| 2017 | Jeep | Wrangler | ||
| 2018 | Jeep | Wrangler |
Specifications:
| California Proposition 65 | WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product. |
| Fitment | Direct Fit |
| Hardware Included | Yes |
| Prop65 Chem1 | Di(2-ethylhexyl)phthalate (DEHP) |
| Description_INV | XRC Gen 1 Bumper w/ Carrier (07-18 JK) |
| Description_EXT | XRC RR BUMP W HITCH TIRE JK 2/4DOOR |
| Description_MKT | The XRC Bumpers Have High Degree Approach Angles And Raised Corners To Maximize Ground Clearance. Manufactured From 3/16 Cold Rolled Steel And Then Robotically Welded To The Exact Specifications. Solid Mount D-Rings That Are Welded On The Inside And Outside. Welds Are Ground Down And Smoothed Out, Then A Two Stage Textured Matte Black Powder Coat Is Applied For The Ultimate Look. Features A 2 Receiver Hitch And Two D-Ring Mounts. Each Bumper Is Developed To Be A Complete Bolt On And Requires No Modifications To The Vehicle. |
| Description_FAB | Fits 2007-2018 Jeep Wrangler JK/JKU |
| Description_FAB | 2 And 4-Door Models |
| Description_FAB | Textured black finish |
| Description_FAB | No drill installation |
| Description_FAB | Class III hitch for true towing rated up to 5000lbs |
| Description_FAB | Solid mount D-rings – Welds on the inside and out |
| Description_FAB | Holds up to a 37″ tire |
| Description_FAB | Manufactured from 3/16 cold rolled steel and then robotically welded to the exact specifications |
| Description_FAB | Features pressed tapered 2 diameter bearings, reinforced double sided gussets |
| Description_FAB | Limited Lifetime Structural Warranty / 5 Year Finish Warranty |
| Description_DEF | Bumper |
Reviews
There are no reviews yet.